Mpls Policy-Parameter Hierarchical - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mpls policy-parameter hierarchical

mpls policy-parameter hierarchical parameterName { nodeValue | atm | atm-vc |
Syntax
atm-vp vpValue | ethernet | fr-vc | forwarding | svlan svlanValue | vlan }
no policy-parameter parameterName
Command introduced in JUNOSe Release 8.0.0.
Release Information
Specifies a parameter value for MPLS interfaces. The no version removes the policy
Description
parameter and its contents.
Options
Interface Configuration
Mode
Related Topics
parameterName Name of policy parameter
nodeValue Aggregation node number in the range 1–65535
vpValue ATM VPI number in the range 0–255
svlanValue SVLAN ID number in the range 0–4095
Creating a Classifier Group for a Policy List
Chapter 13: M Commands
mpls policy-parameter hierarchical
1391