Match-Set Summary Prefix-Tree - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 13: M Commands

match-set summary prefix-tree

match-set summary prefix-tree treeName
Syntax
no match-set summary prefix-tree
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets condition for a route map that matches routes based on the network base address
Description
set in the specified prefix tree and summarizes them by preserving only the bits set
in the prefix tree. The no version disables the use of the prefix tree by the route map.
treeName Name of the prefix tree
Options
Route Map Configuration
Mode
1291
match-set summary prefix-tree