Minimum-Links - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

minimum-links

minimum-links minimumLinkValue
Syntax
no minimum-links
Command introduced in JUNOSe Release 10.0.0.
Release Information
Configures the minimum number of member links in the link aggregation group
Description
(LAG) bundle that must be in the Collecting/Distributing state for the LAG interface
to be considered up. The no version resets the minimum number of member links
to the default value.
Options
Interface Configuration
Mode
Related Topics
minimumLinkValue Minimum number of links in the LAG bundle in the range
1-8 (8 is the maximum number of member links per LAG bundle); default value
is 1.
Configuring 802.3ad Link Aggregation and Link Redundancy in the JUNOSe Link
Layer Configuration Guide
Chapter 13: M Commands
1321
minimum-links