Ipv6 Mld Query-Max-Response-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld query-max-response-time

ipv6 mld query-max-response-time tenthsOfaSecond
Syntax
no ipv6 mld query-max-response-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the period in tenths of a second during which the host is expected to respond
Description
to an MLD query. MLD version 1 includes this value in MLD query messages sent
out on the interface. The no version restores the default value, 100 tenths of a second
(10 seconds).
Options
Interface Configuration, Profile Configuration
Mode
1050
ipv6 mld query-max-response-time
tenthsOfaSecond Time interval between receipt of an MLD query and the
response; in the range 1–254 tenths of a second.