Default-Metric - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

default-metric

[ no ] default-metric metricValue [ interfaceType interfaceSpecifier ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures RIP to use this metric on redistributed routes on all subsequently created
Description
interfaces. The no version restores the default value, 0.
Options
Address Family Configuration, Router Configuration
Mode
metricValue Metric to apply to routes; in the range 1–16
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 5: D Commands
503
default-metric