Ipv6 Mld Static-Include - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld static-include

[ no ] ipv6 mld static-include sourceAddress groupAddress
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns an interface to handle multicast traffic for one or more (S,G) combinations.
Description
The no version removes the (S,G) association from the interface.
Options
Interface Configuration, Profile Configuration
Mode
1056
ipv6 mld static-include
sourceAddress Address of the source
groupAddress Address of the group