L2Tp Destination Lockout-Test - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp destination lockout-test

[ no ] l2tp destination lockout-test
Syntax
Command introduced in JUNOSe Release 7.2.0.
Release Information
Configures L2TP to test locked-out destinations to verify whether a destination is
Description
available before it is returned to service. The no version restores the default behavior,
in which locked-out destinations are not tested.
Global Configuration
Mode
1160
l2tp destination lockout-test