Ip Split-Horizon - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip split-horizon

[ no ] ip split-horizon
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables split horizon, preventing the RIP router from advertising routes from the
Description
interface originating the route, reducing the possibility of routing loops; this is the
default condition. The no version disables split horizon.
Interface Configuration, Subinterface Configuration
Mode
952
ip split-horizon