Member-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

member-interface

[ no ] member-interface interfaceType interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Adds a member interface, also known as a bundle member, to an MLPPP bundle,
Description
an MLFR bundle, or an IEEE 802.3ad link aggregation group (LAG) bundle. The no
version removes the specified member interface from the bundle.
Options
Interface Configuration, Subinterface Configuration
Mode
1312
member-interface
interfaceType One of the following interface types listed in Interface Types and
Specifiers on page 5
serial (MLFR bundle or MLPPP bundle)
pos (MLFR bundle only)
fastEthernet (IEEE 802.3ad LAG bundle only)
gigabitEthernet (IEEE 802.3ad LAG bundle only)
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5