Host - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

host

host hostname ipAddress [ ftp [ [ userAlgorithmType ] userName
Syntax
[ [ passwordAlgorithmType ] password ] ] ] | [ tftp ]
no host hostname
Command introduced before JUNOSe Release 7.1.0.
Release Information
Adds or modifies an entry to the host table. The no version removes the specified
Description
host.
Options
Global Configuration
Mode
hostname Hostname to add or modify; up to 20 characters
ipAddress IPv4 or IPv6 address of the host
ftp Specifies that the host is an FTP server; the default protocol if neither ftp
nor tftp is specified
userAlgorithmType Type of username
0 Indicates that the userName is unencrypted; the default
8 Indicates that the userName is an encrypted password
userName Username used to access an FTP server (but not an NFS server);
defaults to anonymous
passwordAlgorithmType Type of password
0 Indicates that the password is unencrypted; the default
8 Indicates that the password is an encrypted password
password Password used to access an FTP server (but not an NFS server);
defaults to null
tftp Specifies that the host is a TFTP server
Chapter 9: H Commands
691
host