Deadtime - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

deadtime

deadtime recovery
Syntax
no deadtime
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the amount of time, in minutes, that a server is marked as unavailable if
Description
a request times out for the configured retry count. If a server fails to answer a request,
it is marked " unavailable" by the router. The router does not send requests to the
server for the configured time. The no version restores the default value, 0, turning
off the deadtime mechanism.
Options
RADIUS Configuration
Mode
478
deadtime
recovery Number of minutes that a server is marked as unavailable, in the range
0–1440; default value is 0