Ip Destination-Prefix - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip destination-prefix

[ no ] ip destination-prefix ipAddress ipAddressMask deny
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures a subscriber interface or a primary IP interface that is enabled for dynamic
Description
creation of subscriber interfaces to demultiplex traffic with the specified destination
address. The no version removes the association between the interface and the
specified destination address.
Options
Interface Configuration, Subinterface Configuration
Mode
ipAddress—Destination IP address that the router uses to identify packets for
this interface
ipAddressMask Network mask for associated IP subnet
deny Filters packets matching this command
Chapter 10: I Commands
761
ip destination-prefix