Ip Igmp Last-Member-Query-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip igmp last-member-query-interval

ip igmp last-member-query-interval tenthsOfaSecond
Syntax
no ip igmp last-member-query-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies in tenths of a second the maximum time the router waits for a response
Description
after sending a last member query. The router sends a last member query when it
receives an IGMPv2 leave message or an IGMPv3 state change report. The no version
restores the default value, 10 tenths of a second (1 second).
Options
Interface Configuration, Profile Configuration
Mode
824
ip igmp last-member-query-interval
tenthsOfaSecond Time interval between receipt of an IGMP leave message and
sending out of a query in the range 1–254 tenths of a second. Using a lower
value allows members to leave groups more quickly.