Ip Multicast-Routing Permanent-Mroute - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip multicast-routing permanent-mroute

ip multicast-routing permanent-mroute accessListName
Syntax
no ip multicast-routing permanent-mroute
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that newly created mroutes that match the specified access list do not get
Description
timed out. The no version of this command prevents any new mroutes from becoming
permanent. However, it does not remove any existing permanent mroutes. To remove
existing permanent mroutes, use the clear ip mroute command.
Options
Global Configuration
Mode
868
ip multicast-routing permanent-mroute
accessListName Name of the IP access list that contains the mroutes