Isis Lsp-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

isis lsp-interval

isis lsp-interval milliseconds
Syntax
no isis lsp-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the time delay between successive IS-IS link-state packet transmissions.
Description
The no version restores the default value, 33 milliseconds.
Options
Interface Configuration, Subinterface Configuration
Mode
milliseconds Number of milliseconds in the range 1–4294967295; an interval
between successive link-state packets
Chapter 10: I Commands
1129
isis lsp-interval