Ethernet Oam Lfm Remote-Loopback Supported - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ethernet oam lfm remote-loopback supported

[ no ] ethernet oam lfm remote-loopback supported
Syntax
Command introduced in JUNOSe Release 11.1.0.
Release Information
Configures Ethernet OAM remote loopback functionality on an interface and causes
Description
the interface to receive and respond to remote loopback requests from peers. The
no version disables the remote loopback behavior on the interface, which is the
default behavior.
Options
Interface Configuration
Mode
Related Topics
remote-loopback Configures a local interface to be placed into remote loopback
mode and enables the local interface to respond to remote loopback requests
that it receives from a peer OAM entity
supported Enables the Ethernet OAM configuration on the interface to initiate
remote loopback or respond to a remote loopback request it receives from a
peer
OAM Remote and Local Loopback Feature
ethernet oam lfm remote-loopback on page 594
Configuring 802.3ah OAM Link-Fault Management
Example: Enabling Remote Loopback Support on the Local Interface
ethernet oam lfm remote-loopback supported
Chapter 6: E Commands
595