Mdt-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mdt-interval

mdt-interval time
Syntax
no mdt-interval
Command introduced in JUNOSe Release 8.2.0.
Release Information
Configures the time in seconds between successive MLD join TLVs. The no version
Description
returns to the default.
Options
IP PIM Data MDT Configuration
Mode
time Time between successive MLD join TLV in the range 1–300 seconds; the
default is 60
Chapter 13: M Commands
1309
mdt-interval