Frame-Relay Lmi-N392Dte - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

frame-relay lmi-n392dte

frame-relay lmi-n392dte threshold
Syntax
no frame-relay lmi-n392dte
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the error threshold counter (N392) on a DTE interface. The no version removes
Description
current setting and sets the default.
Options
Interface Configuration
Mode
650
frame-relay lmi-n392dte
threshold—Positive number in the range 1–10; number of errors that will place
the interface in an operationally down state; default value is 3 errors