Encapsulation Mlframe-Relay Ietf - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 6: E Commands

encapsulation mlframe-relay ietf

encapsulation mlframe-relay ietf
Syntax
no encapsulation mlframe-relay
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables Multilink Frame Relay encapsulation. The no version removes Multilink
Description
Frame Relay configuration from an interface.
Interface Configuration
Mode
567
encapsulation mlframe-relay ietf