Ike Peer-Identity Domain-Name - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ike peer-identity domain-name

ike peer-identity domain-name domainName
Syntax
no ike peer-identity ip address domain-name
Command introduced in JUNOSe Release 7.3.0.
Release Information
Enables this profile to accept logins from users that present a userFQDN or FQDN
Description
as an IKE identity type and the domain name portion of the IKE identity matches
the domain name setting for this profile. The no version removes the peer IKE
identity.
domainName String of 1–32 characters used as the domain name
Options
IPSec Tunnel Profile Configuration
Mode
705
ike peer-identity domain-name