Ip Policy-Parameter Hierarchical - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip policy-parameter hierarchical

ip policy-parameter hierarchical parameterName { nodeValue | atm | atm-vc | atm-vp
Syntax
vpValue | ethernet | fr-vc | forwarding |
ppp-interface | svlan svlanValue | vlan }
no ip policy-parameter parameterName
Command introduced in JUNOSe Release 8.0.0.
Release Information
ppp-interface keyword added in JUNOSe Release 10.3.0.
Specifies a parameter value for IP interfaces. The no version removes the policy
Description
parameter and its contents.
Options
Interface Configuration, Profile Configuration
Mode
Related Topics
parameterName Name of policy parameter
nodeValue Aggregation node number in the range 1–65535
vpValue ATM VPI number in the range 0–255
svlanValue S-VLAN ID number in the range 0–4095
Creating a Classifier Group for a Policy List
Chapter 10: I Commands
ip policy-parameter hierarchical
913