L2Tp Dial-Out Dormant-Timer-Value - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 12: L Commands

l2tp dial-out dormant-timer-value

[ no ] l2tp dial-out dormant-timer-value dormantTime
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines how long the dial-out session stays in the dormant state waiting for a new
Description
trigger after the associated L2TP outgoing call is ended. The no version set the
dormant timer to the default value, 300 seconds (5 minutes).
dormantTime—Range 0–3600 seconds
Options
Global Configuration
Mode
1165
l2tp dial-out dormant-timer-value