Domain-Authentication - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

domain-authentication

[ no ] domain-authentication { csnp | psnp }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables or disables simple text authentication or HMAC MD5 authentication of IS-IS
Description
level 2 CSNP packets or PSNP packets. The no version restores the default behavior,
in which authentication of IS-IS level 2 CSNPs and PSNPs is disabled.
Options
Router Configuration
Mode
538
domain-authentication
csnp Enables authentication of IS-IS level 2 complete sequence number PDUs
(CSNPs)
psnp Enables authentication of IS-IS level 2 partial sequence number PDUs
(PSNPs)