Interface Lag - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

interface lag

[ no ] interface lag interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates an IEEE 802.3ad link aggregation group (LAG) interface, also known as a
Description
LAG bundle, or a subinterface in a LAG bundle. Link aggregation enables you to group
multiple Ethernet physical interfaces configured on the same module and with the
same characteristics into a single logical interface. The individual Ethernet interfaces
are referred to as member links of the LAG bundle. The no version removes the LAG
bundle or subinterface.
Options
Global Configuration
Mode
Related Topics
interfaceSpecifier—LAG interface specifier; see Interface Types and Specifiers on
page 5
Configuring the Scheduler Hierarchy for Hashed Load Balancing in 802.3ad Link
Aggregation Groups
Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad
Link Aggregation Groups
Configuring Load Rebalancing for 802.3ad Link Aggregation Groups
Chapter 10: I Commands
725
interface lag