Filter - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

filter

[ no ] [ suspend ] filter
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines a policy rule that drops all packets conforming to the current classifier control
Description
list and can be used while the policy list is referenced by interfaces. The no version
removes the filter rule from the policy list; the suspend version temporarily suspends
the policy rule; the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the filter
command, which may be removed completely in a future release.
Classifier Group Configuration
Mode
Related Topics
630
filter
Policy Rule Precedence