JUNOSe 11.1.x Command Reference Guide A to M
disconnect ssh
disconnect ssh { vty vtyId | sessionId }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Terminates an active SSH session. Use the show ip ssh command to determine the
Description
session identifier for the session to terminate. There is no no version.
Options
Privileged Exec
Mode
526
disconnect ssh
vtyId Virtual terminal identifier for VTY where the SSH session resides; use the
show users command to determine the identifier
sessionId Integer in the range 0–4294967295 that identifies the session to be
terminated