Memory - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

memory

[ no ] memory warning highUtilization abatedUtilization
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures memory warning parameters. When the router reaches the high memory
Description
utilization value, it sends warning messages. When memory usage falls to the abated
memory utilization value, the router stops sending warning messages. The no version
returns the memory warning parameters to the default values.
Options
Global Configuration
Mode
1314
memory
highUtilization High memory utilization value; in the range 1–99; default value
is 85
abatedUtilization Abated memory utilization value; in the range 1–99; default
value is 75