ipv6 ospf cost
ipv6 ospf [ processId ] cost intfCost
Syntax
no ipv6 ospf [ processId ] cost
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a cost metric for an interface. Used in the calculation of the SPF routing
Description
table. The no version resets the path cost to the default.
Options
Interface Configuration, Subinterface Configuration
Mode
processId Integer in the range 1–65535
intfCost Link-state metric cost; number in the range 0–65535; default value
is 10
Chapter 10: I Commands
1081
ipv6 ospf cost