Ipv6 Mld Querier-Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld querier-timeout

ipv6 mld querier-timeout seconds
Syntax
no ipv6 mld querier-timeout
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the time that the interface waits before declaring itself as the querier. The no
Description
version restores the default value, twice the query interval.
Options
Interface Configuration, Profile Configuration
Mode
1048
ipv6 mld querier-timeout
seconds Time interval between the last query from the previous router and the
first query from this interface