Forward - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

forward

[ no ] [ suspend ] forward
Syntax
[ interface interfaceType interfaceSpecifier [ next-hop nextHop
[ ignore-default-route ] ]
[ order orderValue ] ] | [ next-hop nextHop [ virtual-router vrName ]
[ ignore-default-route ] [ order orderValue ] ] |
[ order orderValue ] | classifier-group claclName ] [ precedence precValue ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines a rule to forward all packets that match the specified classifier control list.
Description
If you do not specify a classifier control list using the classifier-group keyword, the
router will select all packets from the interface in the direction of the attached policy
list. The no version removes the rule from the policy list; the suspend version
temporarily suspends the forward rule; the no suspend version resumes application
of a suspended rule.
See the forward interface and forward next-hop commands for descriptions of the
Classifier Group Configuration mode versions of this command.
Options
Policy List Configuration
Mode
Related Topics
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
(IP policy lists only)
interfaceSpecifier Particular interface; format varies according to interface type;
see "Interface Types and Specifiers" on page 5 (IP policy lists only)
nextHop Next-hop IP address (IP policy lists only)
ignore-default-route Ignores the default route as a consideration for the next
hop (IP policy lists only)
vrName Name of the virtual router (IP policy lists only)
orderValue Order of this forward rule within the single classifier; in the range
1–32767; default value is 100 (IP policy lists only)
claclName Classifier control list used to classify packets for this policy
precValue Precedence of this rule in relation to other rules within this set: in
the range 0–32768; default value is 100
Assigning Values to the ATM CLP Bit
Chapter 7: F Commands
635
forward