Ip Igmp Version - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip igmp version

ip igmp version { 3 | 2 | 1 | passive }
Syntax
no ip igmp version
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the IGMP version for the interface. The no version restores the default value,
Description
IGMPv2.
Options
Interface Configuration, Profile Configuration
Mode
840
ip igmp version
3 Specifies IGMP version 3
2 Specifies IGMP version 2
1 Specifies IGMP version 1
passive Configures a mapped OIF as a passive interface with only
multicast-data-forwarding capability