Ip Policy-Parameter Reference-Rate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip policy-parameter reference-rate

In Interface Configuration mode:
Syntax
ip policy parameter reference-rate parameterName [ increase ] value
no ip policy-parameter reference-rate parameterName [ increase value ]
In Profile Configuration mode:
ip policy parameter reference-rate parameterName [ increase ] value
no ip policy-parameter reference-rate parameterName
Command introduced in JUNOSe Release 8.1.0.
Release Information
Creates an IP policy parameter for a reference rate; creates a global parameter if it
Description
does not exist. The no version removes the policy parameter and its contents; if used
with the increase keyword, decreases the value.
Options
Interface Configuration, Profile Configuration
Mode
Related Topics
914
ip policy-parameter reference-rate
parameterName Name of policy parameter up to 40 characters
increase Increments the existing reference rate value
value Value of the reference rate parameter, in the range 0–4292967295
Creating a Classifier Group for a Policy List