Ip-Router-Name - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip-router-name

[ no ] ip-router-name [ vrName ]
Syntax
Command introduced in JUNOSe Release 9.0.0.
Release Information
Assigns an IPv4 virtual router. The no version restores the default router.
Description
NOTE: This command replaces the deprecated router-name command, which may
be removed completely in a future release.
Options
Domain Map Configuration
Mode
936
ip-router-name
vrName Name of the virtual router; string of 1–32 alphanumeric characters