Mark-Exp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mark-exp

[ no ] [ suspend ] mark-exp expValue [ mask expMask ] [ profile ProfileName ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
profileName variable added in JUNOSe Release 7.2.0.
Defines an MPLS policy rule that specifies the value of the EXP bits. The no version
Description
removes the rule from the policy list; the suspend version temporarily suspends the
policy rule; the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the mark-exp
command, which may be removed completely in a future release.
Options
Classifier Group Configuration
Mode
Related Topics
1270
mark-exp
expValue EXP bit value assigned to packets; number in the range 0–7
expMask Mask applied to modify some of the EXP bits in IP packet; integer in
the range 1–7
profileName Name of the rate-limit profile to be used in a policy (up to 40
alphanumeric characters)
Assigning Values to the ATM CLP Bit
Policy Rule Precedence