Link Selection - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

link selection

link selection { primary | secondary }
Syntax
no link selection
Command introduced before JUNOSe Release 7.1.0.
Release Information
Disables redundancy on a GE I/O module by allowing operation on the specified port
Description
only. The no version restores the default situation, in which port redundancy is
enabled.
Options
Interface Configuration
Mode
1228
link selection
primary Allows operation on only the primary port
secondary Allows operation on only the redundant port