JUNOSe 11.1.x Command Reference Guide A to M
minimum-dynamic-rate-percent
minimum-dynamic-rate-percent minimumDynamicRatePercent
Syntax
no minimum-dynamic-rate-percent
Command introduced in JUNOSe Release 8.0.0.
Release Information
Specifies the minimum value of the dynamic shaping rate as a percentage of the
Description
shared shaping rate for all simple shared shapers on the router. The no version
removes the specified minimum dynamic rate from all simple shared shapers on
the router.
Options
QoS Shared Shaper Control Configuration
Mode
Related Topics
1320
minimum-dynamic-rate-percent
minimumDynamicRatePercent Minimum percentage value of the dynamic shared
shaper in the range 0–100; default value is 0
Configuring Simple Shared Shaper Algorithm Variables