Ipsec Transport Profile - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipsec transport profile

[ no ] ipsec transport profile { profileName [ [ virtual-router vrName ]
Syntax
ip address ipAddress ] | [ virtual-router vrName ] ip address ipAddress }
no ipsec transport profile { profileName
| [ virtual-router vrName ] ip address ipAddress }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates or configures a transport profile for IPSec and accesses the IPSec Transport
Description
Profile Configuration mode. The no version deletes the transport profile.
Options
Global Configuration
Mode
profileName Name of the transport profile
vrName Name of the VR on which you want to create the profile. If you do not
specify a virtual router, the current virtual router context is used
ipAddress Remote endpoint for the IPSec transport connection. You can enter
a single IP address or the wildcard address of 0.0.0.0. If you use the wildcard
address, the profile accepts any remote client connection, which is a typical
scenario for secure remote access.
Chapter 10: I Commands
1011
ipsec transport profile