L2Tp Reject-Transmit-Address-Change - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp reject-transmit-address-change

[ no ] l2tp reject-transmit-address-change [ ip-address | udp-port ]
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Specifies that E Series routers reject address changes in Start-Control-Connection-Reply
Description
(SCCRP) control packets received from the remote endpoint. If you do not include a
keyword, the router rejects the entire address change. The no version restores the
default, which causes the router to accept address changes in response to SCCRP
packets.
Options
Global Configuration
Mode
1184
l2tp reject-transmit-address-change
ip-address Rejects only IP address changes
udp-port Rejects only UDP port number changes