Frame-Relay Dos-Protection-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

frame-relay dos-protection-group

frame-relay dos-protection-group groupName
Syntax
no frame-relay dos-protection-group
Command introduced in JUNOSe Release 8.1.0.
Release Information
Attaches a Frame Relay denial of service (DoS) protection group to an interface. The
Description
no version removes the attachment of the DoS protection group from the interface.
Options
Interface Configuration
Mode
groupName Name of the DoS protection group; string of up to 31 alphanumeric
characters
Chapter 7: F Commands
frame-relay dos-protection-group
643