Ip Local Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip local pool

[ no ] ip local pool name [ startIpAddress [ endIpAddress ] ]
Syntax
[ warning highUtilization abatedUtilization ] [ snmpTrap ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the pool name, the starting address, the ending address, group name, the
Description
utilization threshold, and the SNMP trap flag. The no version deletes a local pool.
Options
Global Configuration
Mode
name—Text string in the range 1–16 characters that defines the name of the
local address pool
startIpAddress Starting IP address in the local address pool
endIpAddress Ending IP address in the local address pool
warning Specifies one of the following utilization warnings:
highUtilization High utilization value; a number in the range 1–100; default
value is 85
abatedUtilization Abated utilization value; a number in the range 1–100;
default value is 75
snmpTrap Enables SNMP pool utilization traps
Chapter 10: I Commands
847
ip local pool