Mpls Spf-Use-Any-Best-Path - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls spf-use-any-best-path

[ no ] mpls spf-use-any-best-path
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the SPF calculations to consider both the best IGP (IS-IS or OSPF) paths and
Description
the MPLS tunnel to reach the tunnel endpoint. The no version restores the default
value, which is to always use the MPLS tunnel to reach the tunnel endpoint the IGP
best paths are not considered.
Router Configuration
Mode
1418
mpls spf-use-any-best-path