Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide A to M
log severity
log severity { severityValue | off | severityNumber }
Syntax
[ eventCategory [ instanceTree ] | eventCategory instanceTree | eventCategory ]
no log severity [ severityValue | off | severityNumber ] [ eventCategory
[ filters | instanceTree ] | eventCategory { filters | instanceTree } | eventCategory | * ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the severity level for systemwide logs (that is, when no individual event category
Description
is specified) or for a specific event category. The no version returns severity changes
to their default settings or the systemwide setting.
NOTE: After you change the log severity level for an individual log event category,
you cannot use systemwide commands to subsequently change the severity level
for that category. To change individually altered log event categories using systemwide
commands, you must first change the log event back to its default setting.
Options
1248
log severity
severityValue and severityNumber—Minimum severity of the log messages
displayed for the selected category; described either by a descriptive
term severityValue or by a corresponding number severityNumber in the
range 0–7. The lower the number, the higher the priority:
emergency or 0 System unusable
alert or 1 Immediate action needed
critical or 2 Critical condition exists
error or 3 Error condition
warning or 4 Warning condition
notice or 5 Normal but significant condition
info or 6 Informational message
debug or 7 Debug message
off Disables systemwide log severity for all default level event categories when
no event category is specified or disables log severity for a specified event
category
eventCategory Log category; refer to the CLI online Help for available options
filters Removes all log filters for the event category
instanceTree Log-specific filter parameters; refer to the CLI online Help for
available options
* Resets all log severities, systemwide and individual, to default settings
Advertisement
Table of Contents
