L2Tp Tunnel Short-Drain-Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp tunnel short-drain-timeout

l2tp tunnel short-drain-timeout [ timeOutValue ]
Syntax
no l2tp tunnel short-drain-timeout
Command introduced in JUNOSe Release 7.1.0.
Release Information
Configures the amount of time a disconnected LAC L2TP tunnel waits (the drain
Description
timeout) before restarting after a restart request is received. The no version restores
the default setting.
Options
Global Configuration
Mode
1194
l2tp tunnel short-drain-timeout
timeOutValue Short drain timeout in seconds, in the range 0–31; default value
is 2 seconds