Match Level - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

match level

match level { backbone | level-1 | level-1-2 | level-2 | stub-area }*
Syntax
no match level [ backbone | level-1 | level-1-2 | level-2 | stub-area ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches import routes for the specified type. The no version removes the match
Description
clause from a route map unless you specify a value, in which case only that value is
removed from the match clause.
Options
Policy List Configuration, Route Map Configuration
Mode
backbone Specifies OSPF backbone area
level-1 Specifies Level 1 area
level-1-2 Specifies Level 1 and a level 2 area
level-2 Specifies Level 2 subdomain
stub-area Specifies OSPF NSSA area
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 13: M Commands
1285
match level