Ip Rsvp Signalling Hello - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip rsvp signalling hello

{ ip | mpls } rsvp signalling hello
Syntax
[ refresh { interval helloInterval | misses helloMisses } ]
{ no | default } { ip | mpls } rsvp signalling hello
Turns on or configures RSVP-TE hello support. See the mpls rsvp signalling hello
Description
command for a complete description and syntax.
Global Configuration, Interface Configuration, Subinterface Configuration
Mode
942
ip rsvp signalling hello