Distribute-List - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

distribute-list

In Router Configuration mode:
Syntax
[ no ] distribute-list accessListName { in | out } [ interfaceType interfaceSpecifier ]
In Remote Neighbor Configuration mode:
[ no ] distribute-list accessListName { in | out }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the distribute list, an access list applied to incoming or outgoing RIP route
Description
updates. In Remote Neighbor Configuration mode, applies only to a RIP
remote-neighbor interface. The no version removes the distribute list. An IP access
list acts as a filter; refer to the access-list command for details.
Options
Address Family Configuration, Remote Neighbor Configuration, Router Configuration
Mode
532
distribute-list
accessListName Name of the access list; string of up to 32 alphanumeric
characters
in Applies the access list to incoming route updates
out Applies the access list to outgoing route updates
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5