Ipv6 Ospf Area - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 ospf area

[ no ] ip ospf [ processId ] area { areaId | areaIdInt }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates an OSPFv3 interface under the specified area ID or moves an OSPFv3
Description
interface from its current area to a specified area. The no version removes the
interface from the specified area.
Options
Interface Configuration, Subinterface Configuration
Mode
processId Integer in the range 1–65535
areaId OSPF area ID in IP address format
areaIdInt OSPF area ID as a decimal value 0–4294967295
Chapter 10: I Commands
1079
ipv6 ospf area