Existence-Test - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

existence-test

existence-test { event eventOwner eventName |
Syntax
startup { absent | present } | test-type { absent | changed | present } }
no existence-test [ event | startup | test-type ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines existence test values for the trigger that you are configuring, including binding
Description
an event to the existence-test trigger, specifying a startup condition, and defining an
existence-test type. The no version deletes the existence-test values for this trigger
or removes either the startup condition or event binding.
Options
SNMP Trigger Configuration
Mode
614
existence-test
eventOwner Name of event owner that partially specifies event to trigger the
existence test; string of up to 32 alphanumeric characters
eventName Name of event that partially specifies event to trigger the existence
test; string of up to 32 alphanumeric characters
startup Specifies startup existence condition that you predict the sample to
follow; absent or present; you can specify both conditions in the same command
test-type Specifies type of existence test to perform; absent, changed, or present;
you can specify one, two, or all three conditions in the same command