Ip Vrrp Advertise-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip vrrp advertise-interval

ip vrrp vrid advertise-interval advertiseInterval [ seconds | milliseconds ]
Syntax
no ip vrrp vrid advertise-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the VRRP advertisement interval time. You must use seconds to comply
Description
with RFC 2338. Use milliseconds only if all VRRP instances peering for the given
VRID are composed of E Series routers. The no version restores the default value, 1
second.
Options
Interface Configuration
Mode
974
ip vrrp advertise-interval
vrid VRID identifier; a number in the range 1–255
advertiseInterval Advertisement period in seconds or milliseconds; in the range
1–255 seconds or 100–255000 milliseconds
seconds Specifies interval in seconds
milliseconds Specifies interval in milliseconds