Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 1264

JUNOSe 11.1.x Command Reference Guide A to M
IKE Policy Configuration, IPSec Transport Profile Configuration, IPSec Tunnel Profile
Mode
Configuration
1222
lifetime
txHighSeconds Higher range of the lifetime in seconds; in the range 300–86400
seconds; default value is 86400
tunLowSeconds Lower range of the lifetime in seconds; in the range 900–86400
seconds; default value is 3600
tunHighSeconds Higher range of the lifetime in seconds; in the range 900–86400
seconds; default value is 86400
lowKilobytes Lower range of the lifetime in kilobytes; in the range
100000–4294967295 KB; default value is 100000
highKilobytes Higher range of the lifetime in kilobytes; in the range
100000–4294967295 KB; default value is 4294967295